Results 1 to 5 of 5

Thread: CS32BA11.DRV ...

  1. #1
    Inactive Member JHo's Avatar
    Join Date
    February 10th, 2000
    Posts
    18
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Hi,

    Have you used the remove utility?
    What I used to do is first remove all the hardware options for this card under the device manager, and then run this utility.
    After a reboot PnP (Plug and Pray) the system asks for drivers.
    This have always worked ok for me, but I guess i'm a lucky guy.

    John

  2. #2
    Inactive Member KKu's Avatar
    Join Date
    January 19th, 2000
    Posts
    112
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Thumbs up

    Little bit of clearing for error message:

    At first:

    CS32BA11.DRV
    The audio driver did not load because the device is in use.

    After that *crash*:
    MSGSRV32 caused a General Protection fault error in module CS32BA11.DRV...

    No luck with remove & reinstall....


    Another ideas, thnx anyway JHo! smile

    .KKu

    ------------------
    ... mmm, coffeebreak!
    [email protected] http://kotisivu.raketti.net/kaaro
    Now w. ICQ, feel free to contact.

  3. #3
    HB Forum Owner Arnoud de Jong's Avatar
    Join Date
    December 23rd, 1999
    Posts
    138
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Lightbulb

    Hi,
    This CS32BA11.DRV is the Crystal Audio Driver. Maybe it's an idea to check if there are still different versions of this driver on your computer (mine is 1.60). Mostly it resides in the windows/system folder or in the ews64 folder (or both). If I remember correctly, the one in the system folder is loaded first, so if THAT's an older version...
    The msgsrv32.dll is part of the operating system, so I don't think the problem lies here, unless some other program did something strange with it.
    Did you also check the device manager?
    Did you disable the codec and forgot to switch it on again before updating?
    In the past (with early driver versions) running remove more than once also solved some problems. Anyway, MY latest driver update didn't cause any problems. That doesn't help YOU, but at least you know that it can be done ;-)
    Do you have more than one soundcard in the computer? (just an idea...)
    Also you can use and check bootlog.txt to see where things go wrong.
    Good luck,
    Arnoud.

  4. #4
    Inactive Member KKu's Avatar
    Join Date
    January 19th, 2000
    Posts
    112
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Angry

    Ohno ...

    After installing newest drivers, after rebooting computer, W98SE gives message:

    CS32BA11.DRV
    Cannot load driver, drivers is in use...

    No fucking way it's in use, but no more working W98...

    IMHO this is starting to piss off... EWS is fine card, but enough is enough!

    Anybody?

    .KKu

    ------------------
    ... mmm, coffeebreak!
    [email protected] http://kotisivu.raketti.net/kaaro
    Now w. ICQ, feel free to contact.

  5. #5
    Inactive Member KKu's Avatar
    Join Date
    January 19th, 2000
    Posts
    112
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Talking

    HappyHappyJoyJoy!!!

    Now it seems to work.. problem is/was same DMA with SB Live!... Don't know if this helps with my previous problem but at least this is a begin to solve this problem.

    .KKu



    ------------------
    ... mmm, coffeebreak!
    [email protected] http://kotisivu.raketti.net/kaaro
    Now w. ICQ, feel free to contact.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •